“KUSAM-MECO” 6000 COUNTS TRMS DIGITAL MULTIMETER
MODEL – KM 2257
‘KUSAM-MECO’ has added one more “UL” listed Digital Multimeter to its range Model KM 2257. It has a large LCD Display 3⅚ Digits 6000 Counts and Analog Bar graph of 60 segments. It is TRMS Sensing with ingress protection IP40, Pollution Degree 2. It has safety rating CAT II 1000V, III 600V. The Transient protection is 6.0 KV. It meets EMC standard EN 61326-1. It has high overload protection on mV, Ohm & other function of 1000V AC/DC. It has special features such as Auto V (LOZ); VFD measurement; Beep Lit Continuity; Auto ranging MAX/MIN/AVG Record. The LCD Display has Backlight for taking measurements in dark areas. Auto ranging, Relative Zero mode, Display Hold, EF- Detection (NCV), Beepjack on µA, mA/A terminals to prevent wrong connection. It measures AC voltage upto 1000V; AC mV from 0.1mV to 600.0mV; VFD ACV with low pass filter. 600.0V, 1000V. Auto V_ACV Range 6.000V to 1000V; DC voltage 60.00 mV to 1000V; Auto V_DC. 6.00V-1000V. Crest Mode (Instantaneous Peak Hold). Auto Hold Real – Read; Resistance 0.1Ω to 60.00MΩ BeepLit Continuity Tester, Capacitance 0.01nF to 10.00mF; Diode Test; DC current 0.1µA to 10.00A; AC Current 0.1µA to 10.00A; Temperature -40°C to 1000°C; Logic Level Frequency 10Hz – 200.0KHz; Line Frequency 10Hz – 5KHz. Non-Contact EF Detection 3V – 500V.
It operates on 1.5V x 2 Nos. AAA Size Alkaline Batteries, It has Auto Power off function (Idle time 30 minutes) it is light weight 335gm with holster. It is supplied with operation manual, batteries, carrying case & Thermo couple (250°C) only.
“KUSAM-MECO” THREE PHASE POWER ANALYZER
MODEL – KM 2400
‘KUSAM-MECO’ has added a new economical model of Three phase power Analyzer KM 2400 for those users who do not require all functions as in the other power quality analyzer models KM 2100, KM 2200, KM 2300. This power analyzer is economical, compact and simple to use. It covers all necessary measurement functions. It has a 4.3 inch color LCD touch screen. It is equilled with 32GB Micro SD Card for storage of data. If meet Safety standard IEC 61010-1, CAT III 600V. It has 4 input channels for current & 4 input channels for voltage. It can measure in single phase 2 wire, single phase -3wire, 3 phase 3 wire (Delta) 3 phase 4 wire (WYE) systems. The data refresh rate is 1 second. The input voltage range is 0 ~ 600V; It can be programmed for PT ratio 1 to 10000 (variable). The input current range is 1500Amps with SY-1500A current probe. Other option probes available are 0 – 5A; 0 – 50A; 0 – 100A; 0 – 3000A; 0 – 6000Amps. The CT ratio is also variable from 1 to 10 000. The input signal frequency is from 42.5 Hz to 57.5Hz or 51 – 69Hz. It can measure 1 -51th Harmonic. It also measure various Power Parameters such as Active Power(P) Reactive Power (Q), Apparent Power (S) Power factor PF & Cos ɸ. Additionally it can be uses for energy and auditing by measuring Active Energy, Reactive Energy, Apparent energy; Transient events like Dips / Swell are also displayed. It is supplied with voltage Test Leads, Power Card (Adapter), Alligator Clips, Software CD, Manual, Carry bag.
Kusam Electrical Industries Ltd
Shop no.18, 1st Floor, CIDCO Shopping Complex, Plot # 9, Sector-7, Rajiv Gandhi Marg, Sanpada, Navi Mumbai – 400705.
Tel : 022- 27754546, 27750662, 27750292
Email : sales@kusam-meco.co.in
Web : www.kusamelectrical.com
